favicon.ico

Flex Control

Bridges

A purpose-built Z-Wave Bridge designed to allow you to integrate any Z-Wave Device with your Control4 Systems. Easily connect powerful Z-Wave lighting controls, sensors, actuators, and other unique Z-Wave devices all within the comfort of the Control4 Composer ecosystem with the free Generic and Device-Specific Drivers.

Designed for Control4 Integrators with a built-in LAN/WLAN Interface, AC/POE Power options, and full system configuration within Control4 Composer

Purpose-built

With Generic Device Drivers, you can integrate any Z-Wave Device with basic functionality and 2-way communication.

Generic device drivers

We are constantly developing and testing device-specific drivers to allow for full integration with select partner Z-Wave devices

Device-specific drivers

Optional IR & Serial IOs provide additional control functionality for installation behind TVs or near AV Equipment.

Optional IR & serial I/O

flexbox-front-slant.png

Z-Wave + Control4 with out Limits

Use these drivers to configure your FlexBox bridge before adding other devices.

Bridge Drivers

FC-ZIR100-211(v10_2 02-12-2021) - Control4 Driver.zip

FC-ZIR100-211 (v10.2 | 02-12-2021) - Control4 Driver

Use these drivers to connect 3rd party devices to your FlexBox bridge.

Device Drivers

Generic Z-Wave Switch (v10_1 02-10-2021) - Control4 Driver.zip

Generic Z-Wave Switch (v10.1 | 02-10-2021) - Control4 Driver

Generic Z-Wave Dimmer (v10_1 02-10-2021) - Control4 Driver.zip

Generic Z-Wave Dimmer (v10.1 | 02-10-2021) - Control4 Driver

Generic Z-Wave Relay (v10_1 02-10-2021) - Control4 Driver.zip

Generic Z-Wave Relay (v10.1 | 02-10-2021) - Control4 Driver

Generic Z-Wave Door Lock (v11 04-09-2021) - Control4 Driver.zip

Generic Z-Wave Door Lock (v11 | 04-09-2021) - Control4 Driver

Generic Z-Wave Contact Sensor (v10 01-28-2021) - Control4 Driver.zip

Generic Z-Wave Contact Sensor (v10 | 01-28-2021) - Control4 Driver

The FlexBox-Z is a purpose-built professional Z-Wave bridge designed to seamlessly integrate with Control4 systems. It allows for the integration of any Z-Wave device with two-way feedback and flexible control options. The bridge connects to Control4 via LAN or Wi-Fi and can be powered by AC or PoE. Optional Control Module [(CM-211)](https://www.flexcontrol.io/products/control-module) with IR & Serial IOs providing additional control functionality for installation behind TVs or near AV Equipment.

FlexBox package contents (kit without control module)

package-contents-no-control-module.png

flexbox-face.png

flexbox-rear.png

flexbox-side-view.png

flexbox-3-4-view.png

The FlexBox-Z can integrate any Z-Wave device with Control4, including two-way feedback and flexible control options. 

The FlexBox-IR is a simple and affordable bridge designed to add IR & Serial control to any Control4 system. With the small form factor, LAN/WLAN interface, and AC/PoE Power, the FlexBox-IR allows you to add IR and Serial control in any Room.



Small form factor, built-in LAN/WLAN Interface and AC/POE Power options, make FlexBox-IR a perfect add-on to any Control4 System

Compact & Flexible

Built-in 3-directional IR Blaster allows for easy device control if IR emitters are not an optimal choice

IR Blaster

2x IR Outputs, 1x IR Input, and 1x 2way Serial IO are all available for bindings with your favorite IR drivers right in Cotrol4 Composer.

IR & Serial IOs

Simple, small and powerful.

﻿The FlexBox-IR is a simple and compact device designed to add IR & Serial control to any Control4 system. The FC-GIR100 communicates with the Control4 system via LAN or Wi-Fi and can be powered by AC or PoE. The FlexBox-IR provides 2x IR Outputs, 1x IR Input, IR-Blaster, and 1x 2way Serial IO and is fully configure within Composer.  With the small form factor and flexible connectivity, the FlexBox-IR allows you to add IR and Serial control in any Room.

full-package-contents.png

flexbox-with-control-module.png

Add additional IR & Serial control to your Control4 systems with the FlexBox-IR Bridge. 

Professional 433Mhz bridge designed to seamlessly integrate with your Control4 systems. With FlexBox-RF you can capture any 433Mhz or Somfy command and bind them to device drivers or custom programming right inside Composer Pro. With the extra long-range radio you can control fans, fireplaces, LEDs, shades, motorized screens, and more throughout a whole home. The bridge connects to Control4 via LAN or Wi-Fi and can be powered by AC or PoE, allowing for flexible installation anywhere.

Similar to IR Learning, you can now learn any 433 Remote and integrate generic devices with Control4



433MHZ Learning

Built-in Somfy library allows for the integration of many shades and motorized screens which use Somfy/433Mhz motors.

Somfy Library

Optional IR & Serial IOs provide additional control functionality for installation behind TVs or near AV Equipment

Optional IR & Serial IOs

The small form factor, built-in LAN/WLAN Interface, and AC/POE Power options allow for flexible installation on any project

Compact & flexible

The Swiss Army knife you didn't know you needed.

﻿The FlexBox-RF is a purpose-built professional 433Mhz bridge designed to seamlessly integrate with Control4 systems. The FC-IRF100 allows you to capture/record any 433Mhz signal and repeat them on-demand via Control4. With the extra long-range radio, you can control any 433Mhz fan, fireplace, LED light, or appliance.  The FlexBox-RF also comes with built-in Somfy protocol allowing for quick integration of vast election of Shades and motorized screens. The bridge connects to Control4 via LAN or Wi-Fi and can be powered by AC or PoE. The optional Control Module (CM-211) with IR & Serial IOs provide additional control functionality for installation behind TVs or near AV Equipment.

Use the FlexBox-RF Bridge to capture any 433Mhz signal and repeat them on-demand via Control4. 

Accessories

The FlexBox PoE Adapter is a compact accessory designed to power the FlexBox Bridges via PoE. Simply plug in the PoE Adapter to any PoE Switch/Injector and connect the Micro USB and Ethernet cable to FlexBox Bridge.

1x Female RJ45 power for LAN/PoE Input (13W) 

PoE Input

Power Output

LAN Output

flexbox-with-POE-adapter.png

Let there be Power!

The FlexBox PoE Adapter is a compact accessory designed to power the FlexBox Bridges via PoE. Simply plug in the PoE Adapter to any PoE Switch/Injector and connect the Micro USB and Ethernet cable to FlexBox Bridge. The FC-POE-1 Requires less than a 15W PoE budget and outputs 5V 2.4 A on the Micro USB and 10/100 LAN on the Ethernet connector. (Requires a PoE Injector or PoE Switch. PoE Injector is not included in the box)

poe-adapter-3-4-view.png

FlexBox with PoE adapter and control module

flexbox-with-POE-adapter-and-control-module.png

poe-adapter-side.png

Power and connect your FlexBox Bridge or any other 5v device with PoE

The FlexBox Control Module is a compact accessory designed to add additional functionality to FlexBox Bridges. The CM-211 connects directly to FlexBox-Z, FlexBox-IR, or FlexBox-RF via a proprietary 7 pin connector.

Two 3.5mm IR port for use with standard IR Emitter.

IR Outputs

One 3.5mm IR Input port for IR Receivers ( Feature not yet available)

IR Input

One 3.5mm serial port for two-way control of RS-232 Devices

Serial Port

There is more!

The FlexBox Control Module is a compact accessory designed to add additional functionality to FlexBox Bridges. The CM-211 connects directly to FlexBox-Z, FlexBox-IR, or FlexBox-RF via a proprietary 7 pin connector. The Control Module adds 2x IR Outputs, 1x IR Input, and 1x 2-Way Serial IO ports, all available in composer for bindings with your favorite IR and Serial Drivers. We are aware that sometimes the most convenient place to install the Bridge is behind the TV. You can now power the bridge and control your AV equipment with a single Cat5/6.

control-module-3-4-view.png

control-module-molex-connector.png

control-module-ports.png

IR & Serial breakout to expand the capabilities of FlexBox Bridge

Our Products

Bridges

FlexBox Z-Wave Bridge | Z-Wave Plus with Wi-Fi/LAN, AC/POE

FlexBox IR Bridge | IR/Serial IOs with Wi-Fi/LAN, AC/PoE

FlexBox RF Bridge | 433Mhz/Somfy with Wi-Fi/LAN, AC/PoE

Accessories

FlexBox Control Module | 2x IR Outputs, 1x IR Input and 1x Serial Port

FlexBox PoE Adapter | PoE Input to 5VDC & LAN 10/100 Output